Showing posts with label home repair. Show all posts
Showing posts with label home repair. Show all posts

Tuesday, June 22, 2010

Bees Have Nothing on Me

I've been as busy as the proverbial honeymaker this week, and it shows no sign of letting up. For one thing, there are these socks:
Autumn rainbow socks

Really quite delightful and the only thing that persuaded me to give them up to my husband is that I have yarn for two more pairs in colors I like even better.

Our weekend hike was another steamy experience, wherein we collected more data to support our theory that trails with names containing the words Bog, Marsh, Swamp, Creek or Stream will be inhabited by swarms of vicious bloodsucking insects. Despite the forecast for thundershowers, we didn't see any rain, but having umbrellas with us was useful anyway, as we could use them to beat off the clouds of mosquitos. (We were wearing repellent...it may be the only reason we got out alive.)

This week, I thought I'd get a start on using up some of the two giant skeins of gray yarn in the hat and mitten bag, so I cast on a hat. I had planned to do some colorwork to liven it up some. But I couldn't find the book with the Norwegian stitch patterns I was looking for, so I cracked open Alice Starmore's Book of Fair Isle Knitting, which I treated myself to at Christmas and have barely begun to read. I thought I was going to just adapt some of the patterns to two colors, but 5 colors later, I haven't used that much of the gray, but I sure am having a good time!

In house news, I'm halfway through the patch job on the wall that used to have oil pipes coming out of it. That would be the outside half. First I nailed flashing over the holes. (Which were exactly at deck level, and the access is quite small making it fiendishly difficult to get a good solid whack at the nails. I may have set a new record for hitting my thumb.) And then I cut a new piece of siding to go over the space. Of course the siding comes in 16 foot lengths, so what I'm going to do with the 14 feet 10 inches of remaining siding is kind of a conundrum.

What remains is the inside bit- re-insulating the ceiling and putting new drywall over the hole. Which is to say, standing on a ladder holding drywall up to the ceiling while screwing it in place. Such fun! I think I may have to go and learn some new curse words before I start. I have a premonition I may need them.

Wednesday, March 24, 2010

Shutting Up Now

If I've seemed a little quiet this week, there's a reason. Sunday morning after my last post, we got up to find we had no heat or hot water. Proved to be a relatively simple issue (air in the fuel line following the oil tank replacement), but I'm trying to avoid challenging any of the other appliances. Shhh....

Also, all I've knit is red socks, and you've already seen a bunch of them. But I'll be working on something else soon. I'm almost out of red yarn.

Saturday, March 20, 2010

I May Have Spoken Too Soon

But first, in crafting news...the red socks proceed apace:
sock family
"I don't know, dear. I really think he looks like your side of the skein."

The partial sock pictured is actually the start of sock number four. I have yarn for three pairs, and they've been moving so fast, I've just cast on the next as soon as I finish one. Definitely something to love about worsted weight socks!

The fluffy yellow sweater is in negative stitch count...I found a dropped stitch this morning in location that would be hard to fix inconspicuously, and so I ripped back about eight inches of the front. I've reknit about six of those, but the yellow sweater and I are due for some more quality time tomorrow, while I explain my expectations to it.

And yes. I may have spoken too soon when I said it was Tuesday and nothing had broken. Wednesday, during what was supposed to be routine furnace service the technician discovered a leak in our oil tank. Since the oil tank was probably put in when the house was built, this isn't terribly surprising. Finding out that our city who (in contravention to the historic 'Live Free or Die' principles of this great state of New Hampsire) has really annoying building codes that would necessitate moving the fill pipe location, was just an extra special bonus. Three days later:
new oil tank
--we have a new oil tank. Also with code-mandated concrete pylons to prevent us from hitting the tank while driving a power tool into the garage (there's certainly no room for a car in there). We still need to pass the city inspection, but that's fun for next week. Note the gaping hole in the ceiling over the tank--that's the ceiling that was brand new less than four years ago. (The oil tank technicians cut the new holes for the pipes. Fixing the ceiling and patching the old holes is our problem.) The new oil tank went in yesterday.

So then today we went to see our accounting professional and get our taxes done. (We're not gluttons for punishment, the appointment was set up months ago.) At least this year, no one's employer was acquired, no complicated stock transactions occurred, and our employers managed to withhold something approximating the correct amounts in the correct categories. (We have acquired some notoriety with the accountants, between the complexity of last year's return plus twice having cashed in on their guarantee to make right any mistakes in the return.)

By the time we got out of there, we decided that it was time to run away from home, at least for the afternoon. So we drove down to the coast and walked around the wildlife refuge on Plum Island. It was gorgeous- sunny, warm, shirtsleeve weather. Even this early in the spring, the place has a stark beauty:


We had dinner in Newburyport...an Indian restaurant called Jewel in the Crown, which had excellent food (though their medium spiciness would be quite hot by most standards). The nice weather apparently had brought out the crowds because they seemed to be a bit overwhelmed to have a full restaurant, and the service was on the slow side. Still, it was a good meal.

Now. If the remaining household equipment and vehicles would just consent to run normally for a bit....

Friday, January 16, 2009

You've Got Mail

One of the eternal facets of life in New England, is the ongoing skirmish between homeowners and plow drivers. Now, I have to admit that if I was the one getting up at all hours of the day and night in crappy weather, I'd probably be a little cranky myself. But the plow drivers have an outlet for their angst.

Whenever we shovel out the driveway, no matter how long we wait, the plow will come by in the next hour and shove all the snow from the street back in. Three inches of snow? The plow curl across the end of the driveway will be two feet high. And when the snow is over- sometimes a day or two later? After you've shoveled out again? They come back and widen the street, pushing another three feet of former snowbank back into your driveway. It's an unequal contest even when the homeowner has a giant turbo-powered snow-blower. My husband and I and our two little shovels? We don't stand a chance.

And when that gets old, there's always mailboxes. Ever seen a plow with the outlines of little black mailboxes painted on the sides? Me neither. I bet the town objects. Which is a roundabout way to explain that after the storm earlier in the week, we found our mailbox lying on a snowbank half a dozen feet from the support post. To be strictly fair, the box wasn't in great shape to begin with. I have vague intentions of replacing it, probably when the door finally rusts through and falls off. But certainly not in the middle of winter. So I brought the poor battered thing indoors and looked to see how it was fastened.
mailbox grievously wounded

It turns out, they have a recess in the bottom. So to mount it, you cut a board to the width of the box, fasten it to the post, and then screw or nail the box to the board through the sides. Seemed simple enough, though I made exceptionally quick work of the sawing given the frigid temperature prevailing in the garage (where the big saws live).
mailbox mounting

And, now much more securely fastened, it's been returned to its place by the street.
mailbox shivering in snowbank
I'm just hoping the plow drivers can resist the urge to smack it until spring. For the new box, I'm thinking granite post with steel supports.

In other news, the cheery autumn-colored hat is done.
autumn colored hat

And I've finally cast on a new hat for myself. Not soon enough to combat the artic blast that arrived today, however. The crummy old hat is seeing more action than it has in years. I wore it yesterday, then today going in, and then most of the morning at work. We never did get out of the single digits- it was 0 degrees F (-18 C) this morning when I went in to work, and -9 (-13C) on the way home. Not counting wind chill. (That's outside, we made it into the 60s inside the office. Eventually).

Woats was equally unimpressed by hat and weather. But really, really cute!
Woats being cute

Sunday, January 11, 2009

New Year, What, When, How?

Okay, so it's not actually a huge surprise. The New Year does follow Christmas, I've been writing 2009 on work documents for two weeks now (after scratching out 2008, then 1999, which for some reason has gotten stuck as the second default year in my brain after last year's...I'm not entirely sure I'm reconciled to the 21st Century).

And there was the big New Year's Day party, followed by the familial visitation. Between the two of these, we embarked on a major cleaning binge, in the middle of which (after having had the card table my computer was on stolen to play board games), I decided it was perfectly ridiculous to own a lovely desk and not use it. After a brief search, said desk was located in the bedroom (the location wasn't actually in doubt, but it was deeply buried in cruft dating back to construction hell) and moved upstairs to the sewing room. (There is going to be a resolution attached to this, but I'll get to it later in the post.) Anyway, after unburying the desk, not to mention my other computer, I now have a much nicer workspace:
desk and computer

Now, I'm not a big maker of resolutions, recognizing that most aren't kept. But I do have a couple for this year.
1) Put things away when I'm done with them. This is probably the biggest source of clutter around the house, and while I'm not extremely anal about tidiness- stop laughing, Mom, you're about to fall off your chair- I do find that minimizing the clutter is restful.

And that leads me to:
2) Finish going through remaining the bags and boxes of crap, throwing out or organizing and finding places for things to live. The biggest bar to putting things away is not having a 'right place' for them to go. Not that I haven't done a lot of that over the last couple of years, but I think it's time to finish.

If I can accomplish these two things, I think it will open the way for a lot of other projects to happen- I won't think, "Gosh, I should do xxx, but first I'd have to clean up the workroom. Well, maybe after I knit a blanket or something." Knitting, you will perceive is one of my favorite forms of procrastination. For example- there's this hat.
blue and white hat

This is part of my 'I'm bored with this yarn, how can I make it more interesting' campaign...also I've had this compulsion to do colorwork ever since the colorwork sweater that took over my brain in October. And despite not liking hats, I really need one for those cold days when the heat leaving your head makes a whooshing noise, and your ears start cracking. My current hat is kind of a mess. (This may have something to do with living on the floor of my car and being used to clean the windshield until I finally decluttered the car this fall...but maybe it's just kind of old. Yeah, that's it. Old and boring.) Anyway this was just a tad too small to fit me, but that's okay. It was fun, so I threw it into the random outerwear donation bag and started another one.
autumn colors hat
This one's not actually for me- I'm still going to knit myself one out of the dark blue, but it will let me check sizing, and besides, I couldn't knit two hats back to back out of the same colors, right?

Colorwork is kind of annoying to travel with, though (two or three skeins of yarn, needs a bag, stitches slip off the dpns), so I've been switching off with the Fudge Brownie Sundae socks when I needed a pocket-sized project. That hasn't moved especially fast, because it's only been getting a few rows here and there. But yesterday was the Boston Celtic Music Festival(fantastic little festival with local performers, lots of traditional music and dancing), so I had a lot of knitting time listening to music yesterday. And, I've finally started the second sock.
Fudge Brownie Sundae socks

Before Christmas, the winter looked endless- weeks and weeks of snowy cold dark. Now? The days are getting longer, my calendar is filling up, deadlines are closer than they appear, and really- maple season is only a couple of short months away, and there's a lot to do. I'd better get cracking!

PS: And in the run up to the New Year's party, my charming spouse got a multimeter and together we tackled the library lamp. It took two engineers, disassembling the lamp twice more, and a total of three trips to the hardware store (he did all three, bless him!) but it's finally working again. Yay!

Wednesday, December 24, 2008

Twas the Night Before Christmas....

10 pm Christmas eve, the last end of the last knitted gift is woven in, the baking is done, and I'm only a couple of gift bags away from being fully wrapped. Okay, that was maybe a little closer than I wanted to cut it. Partly it's that I was so close to being finished that I took the time to do other things. And partly-

Well, in addition to other useful tips for Christmas knitting, I'd like to mention that if you should a) decide to knit a pattern you've never knit before as a gift, and b) if when you swatch this pattern you find that you *cannot* get gauge in the yarn you have on hand, and c) you decide to use the yarn you have and rewrite the pattern to make it all work....you should possibly not leave this gift to be the last one. Deadlines on the calendar may be closer than they appear.

So. About that enlightenment. Being as I was busy rewriting a knitting pattern on the solstice, I didn't really have time for more than a brief cheer as the sun started to return, but I did indeed note it. I don't mind winter, not even twenty-plus inches of snow we got over the weekend- but the dark, now. The dark, I really hate.

So last week (or the week before??) I was running around trying to make things more light. Exhibit A: I retrieved this lamp from a dark corner (where it was banished due to ugliness) and gave it a place of honor in the living room. It may be ugly, but it has a 100-watt fixture.
mustard-yellow lamp

Then there was this lamp, Exhibit B. If memory serves, it came from a household auction when I was furnishing my first apartment after college. It's a torchiere style, but I found a shade that would clip onto the bulb. It went very well with my Early Garage Sale decor- which is to say nothing matched, so it didn't stand out in the least. Then it experienced a severe electrical failure, and was unplugged for reasons involving not wanting to burn anything down. I eventually got replacement electrical bits from the hardware store and rewired it, but the shade was unsalvageable. So last week I finally dragged the lamp with me to the hardware store and got a shade that actually fit it.
torchiere

Next up was Exhibit C, another floor lamp with lovely wrought-iron-work that my parents got us. That started making unpleasant crackling noises during the summer and also got unplugged (see re: Exhibit B, not burning things down). This lamp had already been rewired- my dad did it before he gave it to us. So that I gave a little more thought to. The bulb is always the first thing to check, but that wasn't it. (A relief since I'm glad to know that bulbs don't make that sort of noise.) The cord seemed to be in good shape, and was anyway not likely, since the lamp had been rewired so recently. That left the switch. I got a new switch, replaced it, and yay! Another working lamp.
wrought iron floor lamp

That brings us to the last and most challenging barrier to my aspirations to extreme candlepower. Exhibit D- it's one of four hanging lamps in the library, almost brand new, and with the diabolical timing usually known only to major appliances, it stopped working about six weeks after the warranty ran out.
library lamp

We've verified that there's current going into the lamp. So. This seems likely to be a switch problem as well. The lamp has three bulbs which can be turned on using one switch. With considerable difficulty, I dismantled the fixture and located the switch. The replacement switch appears to be the right sort. I carefully unwired the old switch, wired up the new one, and we rehung the lamp (from the 14-foot cathedral ceiling--oy!). And--it doesn't work. Darn and drat. So I'm back to square one. Time to finally break down and get a multimeter, and go over this again from the start. Because after going to all the trouble to take the darned thing apart once, I'm not accepting defeat.

In the meantime..I'm three lights ahead of the game. And I'm not staying up until four am knitting, either. I call it a net win for the season.

Happy holidays, and I hope you're not knitting until 4 am either!

Tuesday, August 5, 2008

How Many Engineers Does it Take to Change a Light Bulb?

Or, how a simple task can turn out to be *way* too complicated.

Well, I still haven't finished anything (funny how adding to the number of WIPs does that), and I'll be off-line traveling for the next week, so I thought I'd leave you with a fun story I've been meaning to post from the DIY file.

Once upon a time, the light outside my front door burned out. I kept forgetting and forgetting to change it in the daytime (I don't need to turn on the outdoor light when it was day). But finally I resorted to putting a reminder on my to-do list. So eventually on a sunny Saturday afternoon, I took a new bulb and went out to change it.

And of course it's the kind that has the shade screwed on, so I needed a screwdriver. This should not have been difficult. We have at least two large ones (the smaller ones didn't work- I couldn't get enough leverage). I found numerous other lost tools, including the drill bits (put up three shelves and rehung the doors to the wardrobe, which were taken off to move it during construction), the roundover bit for the router (which I needed for the last custom door), the power planer, which we needed to level the last set of bookcases, and both hand planes (which I didn't need for anything in particular, but should have been on a shelf and not on the floor under a bunch of other crap).

Finally, I went out and bought a new one. Because, really, that's the only surefire way to find a lost tool- replace it. So, I took my brand-new screwdriver and approached the light. Insert blade A into slot B. Twist. Twist harder. I went in and got a chair to stand on so I could get better leverage. I'm not exactly a fragile flower- I'm tall and fairly strong, and I leaned on that screwdriver hard enough to worry about bending the fixture. And still nothing moved. No amount of leverage, no amount of WD-40 on the screws would make the slightest bit of difference. I tried other tools. Nothing. The screws were rusted solidly into the mass. Then I took a closer look at the fixture itself. Rust everywhere. There were even holes rusted through the top. Really it was kind of surprising the area of fixture around the screw hadn't just disintegrated when I tried to get the screws out.

It then occurred to me that that the light itself was probably original to the house (making it 41 years old), and the bulb had probably not been changed in at least eleven years. Why eleven? I'd never changed it before, and I'd been there five years. And the prior owners didn't use the front door (I know, I had to hack through a lot of brush to even find it). And they had the place six years. That put it back to the people before them.

So, now what?

I decided to forget about the screws holding the lampshade on and just dismounted the whole light from the front of the house. Then I went back to the hardware store, and bought a replacement for the whole unit, carefully selecting one that used the same pattern of mounting holes (because the front facade of the house is brick, and I did not want to have to set a new bracket). Naturally the plain inexpensive fixtures all had the wrong sort of mounting hardware, but at that point I just wanted the job done.

So I came home, installed the new lamp. Screwed in the new bulb. Compact fluorescent, so I won't have to worry about it for another eleven years, at least.

The missing screwdrivers turned up several months later. I'm still not speaking to them.

And, as it turns out, it only takes one engineer, three weeks, $60, and a lot of swear words to change a light bulb....
Photobucket

Tuesday, July 15, 2008

The Birth of a Door

Today I finally finished the last step in a fairly extended project. (Not, you understand, that the project has taken so long, but rather I put off doing the last bit for a really embarrassingly long time...)

Anyway, it all started two years ago, when we ripped the roof off our house and built a second story. When we put the stairs up to the new second story, it wasn't practical to put a full-size closet underneath. Rather than give up the space under the stairs, however, I opted to leave the space accessible, with openings for half-height doors on both sides, and an even smaller space under the stairs themselves, accessible from the bedroom. Small is relative of course- we can fit four guitar cases in that space.

Anyway, rather than add custom doors to an already expensive project, I decided to build them myself. I even had a plan- there were several hollow core doors that had been removed during construction and weren't needed (the new doors going in were prehung pine-panel doors).

So, I started with a bare opening. Photobucket

The contractor had installed baseboard across the bottom of the opening, and there was also framing down there. So my first task was to install a few spacers and then put in a sill, that would stick up a bit over the baseboard. The baseboard is pine, so just leaving it hanging in space would be asking for it to get broken. So I rounded over the corners on a length of pine board with the router, and installed the sill:
Photobucket

I also covered bare bits of the stair with a scrap of luan plywood (leftover from the backs of bookcases) and a bit of trim, and painted the inside of the closet. Why? I have no idea. I just felt compelled to do it. Apparently I felt compelled to paint my knees and elbows as well- the space was a tad too deep to paint from the outside- and kind of a tight fit for a painter to crawl into and paint from the inside. But I persevered.
Photobucket

Next step was to figure out the size of the door. Of course the opening wasn't square, so I left a little clearance plus space for the frame and arrived at an estimated size. Then I took a chunk of hollow-core door (left from the other door- I had two spares, but why cut up a door if you don't have to?) and cut it down to finished size.
Photobucket
Photobucket

Of course now you can see that the door isn't solid. (Have you ever wondered what was inside a door? I can now tell you that they have spacers made of chipboard or something similar.)
Photobucket

In order to give the door a solid edge all around, I cut pieces of scrap wood to exact size and fitted and glued them all along the unsupported edges.
Photobucket
Photobucket
Photobucket

This was done in stages- mainly because I didn't have enough clamps to do two sides at once- but this is a good place to break. Next post, building the doorframe, mortising hinges, and prehanging the door.